To make plastics here's what you need to get started.
1. Embosser. $800 (punch the numbers on front of card) - Get a manual one health care format.
2. Tipper. (make the numbers on front of card silver or gold) You dont need a tipper because a lot of cards aren't even tipped. You can print a gold/silver outline in the area where the numbers are if you have the alignment real good for a cheap tipped effect.
3. Hologram (dove or world) $10 each, depending on your vendor.
4. Card printer. (a good ID printer will do) $2-5k depending on brand and quality.
5. Heat press $1k-5 depending on if you want to buy use or new. Used ones work just as well.(if you don't have the sticker type hologram you can use a heat press to press the holo into the card to make it fell smoother to the card)
6. Signature stripe. again, you will need to find a vendor, or just print the signature stripe with your card printer and use a sharpie for signature. Also you can buy pvc cards with sig strips already on them.
7. M and V embosser characters for front of card. These are little harder to get. You can try to get custom keys made locally, or you can use a rapid protype deal, or make hte molds with acrylic.
8. PVC Blanks, Make sure to get 30mil Hi-co (Cost around $15 for 100)
9. A CC scan
1. Embosser. $800 (punch the numbers on front of card) - Get a manual one health care format.
2. Tipper. (make the numbers on front of card silver or gold) You dont need a tipper because a lot of cards aren't even tipped. You can print a gold/silver outline in the area where the numbers are if you have the alignment real good for a cheap tipped effect.
3. Hologram (dove or world) $10 each, depending on your vendor.
4. Card printer. (a good ID printer will do) $2-5k depending on brand and quality.
5. Heat press $1k-5 depending on if you want to buy use or new. Used ones work just as well.(if you don't have the sticker type hologram you can use a heat press to press the holo into the card to make it fell smoother to the card)
6. Signature stripe. again, you will need to find a vendor, or just print the signature stripe with your card printer and use a sharpie for signature. Also you can buy pvc cards with sig strips already on them.
7. M and V embosser characters for front of card. These are little harder to get. You can try to get custom keys made locally, or you can use a rapid protype deal, or make hte molds with acrylic.
8. PVC Blanks, Make sure to get 30mil Hi-co (Cost around $15 for 100)
9. A CC scan
Verified & Trusted WesternUnion | MoneyGram | Bank - Transferring [299$ BTC for 2000$ WU]
Verified & Trusted Electronics Carding, Carding iPhone, Samsung Carding, MacBook Carding, Laptops Carding